Effect of Substrate Temperature on the Electrical Properties of Al-doped Zinc Oxide Films Deposited on Polyethylene Terephthalate
Abstract
To prepare homogeneous thin films of zinc oxide (ZnO) doped with aluminum (Al) on a polyethylene terephthalate (PET) substrate at different temperatures (200-250 °C), the process is carried out by utilizing the chemical spraying pyrolysis approach. A study of the effects of substrate temperature on the Al-doped Zinc Oxide (AZO) films' electrical characteristics and roughness is performed. The measurements of atomic force microscopy (AFM) shows that the root mean square (RMS) roughness of the AZO films is increased with the increase of PET substrate temperature. Hall measurements show that the electrical resistivity decreases as the substrate temperature increases. Upon the increment of substrate temperature, there is an increase in the carrier concentration value from 9.98 × 1019 to 5.4 × 1020 cm−3 and an increase in the carrier mobility value from 5.5 to 9.76 cm2.(V. S)−1.
Downloads
References
Assuncao, V., Fortunato, E., Marques, A., Aguas, H., Ferreira, I., Costa, M.E. and Martins, R., 2003. Influence of the deposition pressure on the properties of transparent and conductive ZnO: Ga thin-film produced by rf. sputtering at room temperature. Thin Solid Films, 427, pp.401-405.
Ayouchi, R., Leinen, D., Martín, F., Gabas, M., Dalchiele, E. and Ramos-Barrado, J.R., 2003. Preparation and characterization of transparent ZnO thin films obtained by spray pyrolysis. Thin Solid Films, 426, pp.68-77.
Bube, R.H., 2001. Encyclopedia of Physical Science and Technology. 3rd ed. Academic Press, USA.
Faraj, M.G. and Esia, M.H., 2019. Effect of polyimide substrate on the physical properties of Aluminum doped Zinc Oxide (AZO) thin films deposited by spray pyrolysis technique. Digest Journal of Nanomaterials and Biostructures, 14, pp.471-478.
Faraj, M.G. and Ibrahim, K., 2011. Optical and structural properties of thermally evaporated zinc oxide thin films on polyethylene terephthalate substrates. International Journal of Polymer Science, 2011, p4.
Faraj, M.G. and Taboada, P., 2017. Comparative studies of the properties ofZnO sprayed thin films on different polymer substrates for flexible solar cell
applications. Journal of Inorganic and Organometallic Polymers and Materials, 27, pp.1405-1411.
Faraj, M.G. and Taboada, P., 2017. Structural and optical properties of ZnO thin films prepared by spray pyrolysis on PI plastic substrates at various temperatures for integration in solar cell. Journal of Materials Science: Materials in Electronics, 28, pp.16504-16508.
Faraj, M.G., Ibrahim, K. and Ali, M.K., 2011. PET as a plastic substrate for the flexible optoelectronic applications. Optoelectronics and Advanced Materials Rapid Communications, 5, pp.879-882.
Faraj, M.G., Ibrahim, K., Esia, M.H., Pakhuruddin, M.K. and Pakhuruddin, M.Z., 2011. Comparison of Zinc Oxide thin films deposited on the glass and polyethylene terephthalate substrates by thermal evaporation technique for applications in solar cells. Optoelectronics and Advanced Materials Rapid Communications, 4, pp.1587-1590.
Ghorannevis, Z., Hosseinnejad, M.T., Habibi, M. and Golmahdi, P., 2015. Effect of substrate temperature on structural, morphological and optical properties of deposited Al/ZnO films. Journal of Theoretical and Applied Physics, 9, pp.33-38.
Gong, L., Lu, L. and Ye, Z., 2010. Transparent and conductive Ga-doped ZnO films grown by RF magnetron sputtering on polycarbonate substrates. Solar Energy Materials and Solar Cells, 94, pp.937-941.
Hu, C.C., Lu, T.W., Chou, C.Y., Wang, J.T. and Hsu, C.Y., 2014. Optimization of AZO films prepared on flexible substrates. Bulletin, 37, pp.1275-1282.
Jeong, A.J., Shin, H.S., Choi, K.H. and Kim, H.K., 2010. Flexible Al-doped ZnO films grown on PET substrates using linear facing target sputtering for flexible OLEDs. Journal of Physics D: Applied Physics, 43, p.465403.
Kaurn, G., Mitra, A. and Yadav, K.L., 2015. Pulsed laser deposited Al-doped ZnO thin films for optical applications. Progress in Natural Science: Materials International, 25, pp.12-21.
Myong, S.Y., Baik, S.J., Lee, C.H., Cho, W.Y. and Lim, K.S., 1997. Extremely transparent and conductive ZnO: Al thin films prepared by photo-assisted metalorganic chemical vapor deposition (photo-MOCVD) using AlCl3 (6H2O) as new doping material. Japanese Journal of Applied Physics, 36, p. L1078.
Park, S.M., Ikegami, T. and Ebihara, K., 2006. Effects of substrate temperature on the properties of Ga-doped ZnO by pulsed laser deposition. Thin Solid Films, 513, pp.90-94.
Raghu, P., Srinatha, N., Naveen, C.S., Mahesh, M.H. and Angadi, B., 2017. Investigation on the effect of Al concentration on the structural, optical and electrical properties of spin coated Al: ZnO thin films. Journal of Alloys and Compounds, 694, pp.68-75.
Ryu, M.S., Cha, H.J. and Jang, J., 2010. Improvement of operation lifetime for conjugated polymer: Fullerene organic solar cells by introducing a UV absorbing film. Solar Energy Materials and Solar Cells, 94, pp.152-156.
Tynell, T., Yamauchi, H., Karppinen, M., Okazaki, R. and Terasaki, I., 2013. Atomic layer deposition of Al-doped ZnO thin films. Journal of Vacuum Science and Technology, A31, p.01A109.
Wang, S., Li, X. and Zhang, J., 2009. Effects of substrate temperature on the properties of heavy Ga-doped ZnO transparent conductive film by RF magnetron sputtering. Journal of Physics: Conference Series, 188, p.012017.
Zhao, M.J., Sun, Z.T., Hsu, C.H., Huang, P.H., Zhang, X.Y., Wu, W.Y., Gao, P., Qiu, Y., Lien, S.Y. and Zhu, W.Z., 2020. Zinc Oxide films with high transparency and crystallinity prepared by a low temperature spatial atomic layer deposition process. Nanomaterials(Basel), 10, p.459.
Zhou, H.M., Yi, D.Q., Yu, Z.M., Xiao, L.R. and Li, J., 2007. Preparation of aluminum doped zinc oxide films and the study of their microstructure, electrical and optical properties. Thin Solid Films, 515, pp.6909-6914.
Copyright (c) 2022 Mohammad G. Faraj
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who choose to publish their work with Aro agree to the following terms:
-
Authors retain the copyright to their work and grant the journal the right of first publication. The work is simultaneously licensed under a Creative Commons Attribution License [CC BY-NC-SA 4.0]. This license allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
-
Authors have the freedom to enter into separate agreements for the non-exclusive distribution of the journal's published version of the work. This includes options such as posting it to an institutional repository or publishing it in a book, as long as proper acknowledgement is given to its initial publication in this journal.
-
Authors are encouraged to share and post their work online, including in institutional repositories or on their personal websites, both prior to and during the submission process. This practice can lead to productive exchanges and increase the visibility and citation of the published work.
By agreeing to these terms, authors acknowledge the importance of open access and the benefits it brings to the scholarly community.